IntelliTone digital toning technology:
Ends cable location confusion, decisively rejects noise and false signals
Locates cables on active networks, even when terminated at a switch
Isolates cable and wiring within a bundle, despite cable bleed
Confirms cable location, verifies continuity, and detects faults (opens, shorts, and reversed pairs) in one step
SmartTone® analog toning technology:
Isolates individual wire pairs precisely by changing tone when shorted
Effectively traces and locates voice, audio, and video cabling
IntelliTone™ Pro 200 LAN Toner and Probe, MT-8200-60A
Digital network cable toner and probe traces and locates cables on active network.
IntelliTone digital toning technology:
Ends cable location confusion, decisively rejects noise and false signals
Locates cables on active networks, even when terminated at a switch
Isolates cable and wiring within a bundle, despite cable bleed
Confirms cable location, verifies continuity, and detects faults (opens, shorts, and reversed pairs) in one step
SmartTone® analog toning technology:
Isolates individual wire pairs precisely by changing tone when shorted
Effectively traces and locates voice, audio, and video cabling
Specifications
| Operating temperature |
32 °F to 104 °F (0 °C to 40 °C) |
| Storage temperature |
-4 °F to +140 °F (-20 °C to +60 °C) |
Operating relative humidity
(% RH without condensation) |
95% (50 °F to 95 °F; 10 °C to 35 °C)
75% (95 °F to 104 °F; 35 °C to 40 °C)
Uncontrolled < 50 °F (< 10 °C) |
| Vibration |
Random, 2 g, 5 Hz – 500 Hz |
| Shock |
1 m drop test with and without module |
| Safety |
IEC 61010 Category: None |
| Altitude |
3000 m |
| EMC |
EN 61326-1 |
| Battery type and life |
9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical |
| Applications |
Copper cabling media, including shielded (STP) and UTP cable; 75 or 50 Ohm coaxial cable; two conductor
control, security, generic cabling. 10 Base-T or 10/100/1000 Base-T datacom networks. |
| Dimensions |
5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm) |
|
| Display |
LED |
| Control |
Thumbwheel switch |
| Toner interface |
Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling, F connector for coaxial cabling, Banana jack plugs (2) - two conductor wiring |
| Toner frequency |
IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500-1200Hz, 4 Songs |
| Output power |
5 V p-p |
| Auto power down |
Turns off automatically after 2.5 hours of inactivity |
| Dimensions |
8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm) |
|
| Display |
(8) LED indicators, Synch LED indicator |
| Audio |
IntelliTone: Microprocessor controlled audio files, Analog: Detected toner signal |
| Control |
Thumbwheel switch, volume control wheel |
| Tone detection |
Detects IntelliTone™ digital signal for Locate, Isolate and CableMap
Detects Analog SmartTone Signal (500-1200Hz) and other analog toners. |
| Toner interface |
Main Mod8 port for cablemap on all four pairs of UTP / STP cabling |
| Auto power down |
Turns off automatically after one hour of inactivity |
Ordering Information
| MT-8200-60-KIT |
IntelliTone Pro 200 LAN Kit
Includes IntelliTone Pro 200 LAN Toner and 200 Probe, coax F connector adapter, two RJ11 and two RJ45 patch cables,test leads with alligator clips, lanyards, quick start guide, and two 9 volt batteries
|
| MT-8200-61-TNR |
IntelliTone Pro 200 LAN Toner |
| MT-8200-63A |
IntelliTone Pro 200 Probe |
| MT-8202-05 |
IntelliTone Pro Case |
| MT-8203-20 |
Test Leads with Bed of Nails |
| MT-8203-22 |
Test Leads with Alligator Clips |
IntelliTone Pro 200 LAN Kit
- Finds the cables the others can’t
- IntelliTone digital signal processing rejects noise and false signals
- SmartTone analog signal precisely isolates individual wire pairs
- Tones safely and clearly on active networks
- Tests for continuity
- Identifies and diagnoses 10/100/1 Gb Ethernet link connectivity with NIC/hub indication
- Verifies twisted-pair installation with CableMap capability which identifies common cable miswire